show ipsg

 

 

This chapter describes the outputs of the show ipsg command.

 

show ipsg service all

show ipsg service all Command Output Descriptions

Field	Description
Context	The context in which the IPSG service is configured.
Bind	The binding status of the service. Defines if the service has been bound to the appropriate interfaces (radius-server mode) or to any interface in the context (radius-snoop mode).
Max Subscribers	The total number of subscribers allowed for the service. This field displays a configured number or, if not configured, the total amount specified by the IPSG service license.
Mode	The IPSG service mode type: radius-server or radius-snoop
Address	The IP address of the interface where RADIUS accounting requests are received.
Port	The port number of the interface where RADIUS accounting requests are received.
Source-Context	The source context with the interface where RADIUS accounting requests are received.
Default Subscriber	Identifies the default subscriber for the context.
Service Status	The status of the IPSG service. Defines if the service has been started.

‌

 

show ipsg session all

show ipsg session all Command Output Descriptions

Field	Description
CALLID	The call ID of the session.
NAI	The subscriber’s Network Address Identifier.
Home Address	The subscriber’s IP address.

‌

 

show ipsg statistics

show ipsg statistics Command Output Descriptions

Field	Description
RADIUS Accounting
Total START Req rcvd	Cumulative RADIUS accounting start requests received since the last system restart or clear command.
Total START Req (Retransmitted) rcvd	Cumulative retransmitted RADIUS accounting start requests received since the last system restart or clear command.
Total START Sent	Cumulative RADIUS accounting start responses sent by this system since the last system restart or clear command.
Total INTERIM Updt rcvd	Cumulative RADIUS accounting interim updates received since the last system restart or clear command.
Total STOP Req rcvd	Cumulative RADIUS accounting stop requests received since the last system restart or clear command.
Total ACCESS Req rcvd	Cumulative IPSG RADIUS Access Request messages received since the last system restart or clear command.
Total ACCESS Req (Retransmitted) rcvd	Cumulative IPSG RADIUS Access Request retransmission messages received since the last system restart or clear command.
Total ACCESS Accept sent	Cumulative IPSG RADIUS Access Accept messages sent since the last system restart or clear command.
Total ACCESS Reject sent	Cumulative IPSG RADIUS Access Reject messages sent since the last system restart or clear command.
Total UNKNOWN req rcvd	Cumulative unknown requests received since the last system restart or clear command.
Total Response sent	Cumulative RADIUS accounting responses sent since the last system restart or clear command.
Total Discarded Msgs (Mandatory Attr Missing)	Cumulative messages discarded because of missing mandatory attribute since the last system restart or clear command.
Total Discarded Msgs (Interim For Non-Existing Session)	Cumulative RADIUS accounting interim packets discarded, when there is no session existing, since the last system restart or clear command.
Total Discarded Msgs (Stop For Non-Existing Session)	Cumulative RADIUS accounting stop packets discarded, when there is no session existing, since the last system restart or clear command.
Total Discarded Msgs (Unknown Client)	Cumulative messages discarded when received from an unknown client since the last system restart or clear command.
Total Discarded Msgs (Interconnect shared secret)	Cumulative RADIUS request messages discarded, because the shared secret was incorrect, since the last system restart or clear command.

‌

 

 

Cisco Systems Inc.

Tel: 408-526-4000

Fax: 408-527-0883